Pipe Grabber Pipe Marking Sleeves

Something new from the industrial labeling leader... Pipe Grabber Pipe Marking Sleeves!

When you need to label dirty, oily, rusty or unlagged insulated pipes... use Pipe Grabber pipe marking sleeves.

When you need to label pipes located in an area where there are harsh conditions (outdoors in the winter, for example)... use Pipe Grabber pipe marking sleeves.

When you need to label temporary piping... use Pipe Grabber pipe marking sleeves.

Pipe Grabber pipe marking sleeves are clear plastic sleeves that are designed to "snap" into place around pipes and conduit. They are pre-formed to tightly curl around the pipe, gripping it tighlty. If needed, plastic ties can be used to hold them in place.

Pipe Grabber pipe marking sleeves are available for pipe diameters from one inch up to 5.2 inches.

Pipe Grabbers allow you to apply labels under ideal conditions in your shop. This means labels can be applied correctly so they are straight, securely applied, and there is no dirt, oil or grease that will prevent good adhesion. The Pipe Grabber can then be quickly "snapped" into place on the pipe.